Yeterlilik Kodu

TR0030020784

Yeterlilik Adı
Ağız ve Diş Sağlığı Ön Lisans Diploması
Sorumlu KurumBeykoz Üniversitesi
Sorumlu Kurum İletişim BilgisiBeykoz Üniversitesi
Sorumlu Kurum URLhttp://www.beykoz.edu.tr/
YönelimGenel
AYÇ Seviyesi5
Yeterlilik TYÇ’ye yerleştirilmemiştir.
TYÇ Seviyesi 5
Sınıflandırma (Tematik Alan)Diş muayenesi
Sınıflandırma (Meslek Kodu) -
KategoriAna
Kredi Değeri120
Programın Normal Süresi 2
Program Profili (Amaç)

Toplumun değişen gereksinimlerini yanıtlayabilecek bilgi ve beceriye sahip elemanlar yetiştirip bu bireylere bilgilerini tam olarak kullanabilecekleri iş ve aktivite alanları sağlamaktır. Eğitim süresince sağlanan staj olanakları öğrencilerin kendilerini azami düzeyde geliştirmeleri için büyük fırsat sağlamaktadır. Meslek Yüksek Okulu'nun eğitim programı sadece teorik gelişimi hedeflememelidir. Aynı zamanda güçlü bir pratik alt yapıyla eğitim pekiştirilmelidir. Günümüz iş dünyasında son derece önemli olan insan ilişkileri vurgulanmakta ve bireyin sosyal açıdan da tam olarak olgunlaşması sağlanmaktadır.

Öğrenme Ortamları-
Öğrenme Kazanımları (Tanım)
  • Mesleki sorumluluğu taşıyabilmede yeterlilik kazanır.
  • Mesleğe ait bilgileri takip etme alışkanlığı edinmede yetkinlik kazanır.
  • İlgili olduğu sağlık alanı ile ilgili olarak bilgi ve teknolojiye erişim yolları ve araçlarını kullanmada yetkinlik kazanır.
  • Hekim ile birlikte bir ekip oluşturulmasında ve birlikte çalışmada yetkinlik kazanır.
  • İlkyardım uygulamada yetkinlik kazanır.
Anahtar Yetkinlikler -
Ölçme ve Değerlendirme Yöntemleri -
Kalite Güvencesi-
Giriş Şartı

AĞIZ VE DİŞ SAĞLIĞI bölümüne Öğrenci Seçme ve Yerleştirme Merkezinin (ÖSYM) yaptığı Yükseköğretim Kurumları Sınav (YKS) sonucuna göre TYT puan türünden kabul edilirler.

Başarma Şartları-
İlerleme Yolları (İlişki Türü)

Bu programdan mezun olan öğrenciler hastanelerde "Ağız ve Diş Sağlığı Teknikeri" olarak çalışabilmektedir. Bu Bölümden mezun olanlar diş laboratuvarlarında, diş kliniklerinde, hastanelerin diş sağlığı ile ilgili birimlerinde ve diş sağlığı konusunda teknik donanım sağlayan firmalarda çalışabilirler. Bu bölümden mezun olanlar bireysel çalışma imkânına sahip olmayıp diş kliniklerinde, hastanelerin diş sağlığı ile ilgili birimlerinde veya kamu kuruluşlarında çalışabilirler.

Yasal Dayanağı-
Geçerlilik Süresi (Varsa)

Yeterlilik sürekli geçerlidir.

Yeterliliğe Erişim için İnternet Adresi Adresi Aç
Yeterlilik Kodu

TR0030020784


Yeterlilik Adı
Ağız ve Diş Sağlığı Ön Lisans Diploması

Sorumlu Kurum
Beykoz Üniversitesi

Sorumlu Kurum İletişim Bilgisi
Beykoz Üniversitesi

Sorumlu Kurum URL

Yönelim
Genel

Sınıflandırma (Meslek Kodu)
-

AYÇ Seviyesi
5

TYÇ Seviyesi
5
Yeterlilik TYÇ’ye yerleştirilmemiştir.

Sınıflandırma (Meslek Kodu)
-

Kategori
Ana

Kredi Değeri
120

Programın Normal Süresi
2

Program Profili (Amaç)

Toplumun değişen gereksinimlerini yanıtlayabilecek bilgi ve beceriye sahip elemanlar yetiştirip bu bireylere bilgilerini tam olarak kullanabilecekleri iş ve aktivite alanları sağlamaktır. Eğitim süresince sağlanan staj olanakları öğrencilerin kendilerini azami düzeyde geliştirmeleri için büyük fırsat sağlamaktadır. Meslek Yüksek Okulu'nun eğitim programı sadece teorik gelişimi hedeflememelidir. Aynı zamanda güçlü bir pratik alt yapıyla eğitim pekiştirilmelidir. Günümüz iş dünyasında son derece önemli olan insan ilişkileri vurgulanmakta ve bireyin sosyal açıdan da tam olarak olgunlaşması sağlanmaktadır.


Öğrenme Ortamları
-

Öğrenme Kazanımları (Tanım)
  • Mesleki sorumluluğu taşıyabilmede yeterlilik kazanır.
  • Mesleğe ait bilgileri takip etme alışkanlığı edinmede yetkinlik kazanır.
  • İlgili olduğu sağlık alanı ile ilgili olarak bilgi ve teknolojiye erişim yolları ve araçlarını kullanmada yetkinlik kazanır.
  • Hekim ile birlikte bir ekip oluşturulmasında ve birlikte çalışmada yetkinlik kazanır.
  • İlkyardım uygulamada yetkinlik kazanır.

Anahtar Yetkinlikler
-

Ölçme ve Değerlendirme Yöntemleri
-

Kalite Güvencesi
-

Giriş Şartı

AĞIZ VE DİŞ SAĞLIĞI bölümüne Öğrenci Seçme ve Yerleştirme Merkezinin (ÖSYM) yaptığı Yükseköğretim Kurumları Sınav (YKS) sonucuna göre TYT puan türünden kabul edilirler.


Başarma Şartları
-

İlerleme Yolları (İlişki Türü)

Bu programdan mezun olan öğrenciler hastanelerde "Ağız ve Diş Sağlığı Teknikeri" olarak çalışabilmektedir. Bu Bölümden mezun olanlar diş laboratuvarlarında, diş kliniklerinde, hastanelerin diş sağlığı ile ilgili birimlerinde ve diş sağlığı konusunda teknik donanım sağlayan firmalarda çalışabilirler. Bu bölümden mezun olanlar bireysel çalışma imkânına sahip olmayıp diş kliniklerinde, hastanelerin diş sağlığı ile ilgili birimlerinde veya kamu kuruluşlarında çalışabilirler.


Yasal Dayanağı
-

Geçerlilik Süresi (Varsa)

Yeterlilik sürekli geçerlidir.


Yeterliliğe Erişim için İnternet Adresi
Adresi Aç

Qualification Code

TR0030020784

Qualification Title
Oral and Dental Health Associate Degree
Awarding BodyBEYKOZ UNIVERSITY
Awarding Body Contact
Awarding Body Urlhttp://www.beykoz.edu.tr/
OrientationGeneral
EQF Level5
The Qualification hasn't been included in TQF.
TQF Level 5
Thematic AreasDental studies
National Occupation Classification

ISCO 08

CategoryMain
Credit Value120
Program Duration2
Program Profile-
Learning Environments-
Description-
Key Competencies-
Further Info

The articles related to Education Training and Exam Regulations of Beykoz University Undergraduate and Associate Degree Programs are mentioned below.

Assessment, evaluation and final grade Exams ARTICLE 31 -

  • Exams consist of short and midterm exams and final exams, single course exams, make-up exams, exemption exams and additional exams which are held in the semester.

Final Grade ARTICLE 38 – 

  • The final grade of students in a formal program related to a course is calculated through; 50% of the weighted average of the grades they receive from the midterm assessment and evaluation activities and 50% of the grades they receive from the final exam.  
  • Evaluating a course depends on: Students whose grade of success and / or final grade are under 35 are considered to be unsuccessful for that course. 
  • There is no midterm and final examination for professional practice (internship) at work. The evaluation related to this learning activity is carried out through following the instructions of Beykoz University Professional Practice (Internship) Directive. The final grade of the related activity is evaluated by the grade of Successful (BI) and Unsuccessful (BZ); these grades are not included in the grade point average. 
  • The final grades of the courses that do not require midterm and/or final exams can be evaluated as Successful (BI) / Unsuccessful (BZ) with an absolute grade according to the quality of the courses ; these grades are not included in the grade point average. 
  •  For the courses that do not require midterm and/or final exams and that have incomplete evaluation processes, Incomplete (E) grade can be given temporarily. The final grades of these courses are turned into absolute grades or Successful (BI) / Unsuccessful (BZ) when the evaluation process is complete.  

Calculating final grade and explanations   ARTICLE 41 – 

  • Final grades are calculated by considering statistical dispersion of grades and class average and converted to letter grades by “Beykoz University Relative Evaluation Directions” For the numbers of students that are not applicable to minimum relative evaluation, absolute grading system is used. The correlation between absolute grades and letter grades and their numeric grade equivalents are given in Table 1. Table 1: The correlation between absolute grades and letter grades and their numeric grade equivalents     Absolute Grade Letter Grade Numeric Grade Meaning 90 - 100 AA 4,0 Perfect 80 - 89 BA 3,5 Very Good 73 - 79 BB 3,0 Good 66 - 72 CB 2,5 Average 60 - 65 CC 2,0 Sufficient 55 - 59 DC 1,5 Pass 50-54 DD 1,0 Pass 36- 49 FD 0,5 Fail 0 - 35 FF 0,0 Fail due to absence - DZ 0,0 Fail due to absence - BI - Successful - BZ - Unsuccessful - M - Exempted  -  W  - Withdrawal  -   E  - Incomplete Grade  

a) A student who gets (AA), (BA), (BB), (CB), (CC), (DC) and (DD), (BI), (M) as a final grade for a class is considered to have passed from that class.  

b) A student who gets (FD), (FF) from a class is considered to have failed from it.  

c)  Students who do not meet the attendance requirements of a class are given DZ grade. DZ grade is counted as FF when grade point average is calculated.  

d)  (BI) is given as a grade which is not added to the grade point average and for the classes a student has passed.     

e) (BZ) is given as a grade which is not added to the grade point average and for the classes a student has not passed.  

f) (M) is given as a grade which is not added to the grade point average, and is given to the students who is counted as exempt from a class as a result of the evaluation of the exemption  in accordance with paragraph 3 in article 29 of this regulation  

g) (W) is a grade used to identify a students’ situation in the transcript in the event of a withdrawal from a class.  

h) (E) Ungraded is a temporary grade which is given to the students when the assessment process has not been completed yet. (E) grade which is not changed within the predetermined deadline will be converted to a failed grade.  

  • Conversion of university letter grades to ECTS grades and vice versa is carried out in accordance with “Beykoz University ECTS Application Guideline”.  

The Calculation of Grade Points Average ARTICLE 42 – 

  • Grade Points Average (GPA) is calculated on all the semesters by multiplying the number of credits given for a course times the value of the grade received for the course, adding the value calculated for each class and dividing by the total number of credits. 
  • Semester Grade Average is calculated within any semester by multiplying the number of credits given for a course times the value of the grade received for the course, adding the value calculated for each class and dividing by the total number of credits. 
  • Three-digit process is carried out in the calculation of the grade average and it is displayed in two-digit figure. During the rounding process, if the third digit figure after the decimal point is between 0-4, it is rounded downwards, but if it is between 5-9, it is rounded upwards.    
Quality Assurance-
Access Requirements

Oral and Dental Health Department Student Selection and Placement Center (ÖSYM) by Higher Education Institutions Examination (YKS) according to the results are accepted as TAT score.

Conditions for Success-
Progression Paths (Relationship Type)

Graduates of this program can work as "Oral and Dental Health Technician" in hospitals. Graduates of this department can work in dental laboratories, dental clinics, dental health departments of hospitals and companies that provide technical equipment for dental health. Graduates of this department may not work individually and may work in dental clinics, dental health departments of hospitals or public institutions

Legal Basis-
Validity Period (If Any)-
Url Open Address
Qualification Code

TR0030020784


Qualification Title
Oral and Dental Health Associate Degree

Awarding Body
BEYKOZ UNIVERSITY

Awarding Body Contact

Awarding Body Url

Orientation
General

National Occupation Classification

ISCO 08


EQF Level
5

TQF Level
5
The Qualification hasn't been included in TQF.

National Occupation Classification

ISCO 08


Category
Main

Credit Value
120

Program Duration
2

Program Profile
-

Learning Environments
-

Description
-

Key Competencies
-

Further Info

The articles related to Education Training and Exam Regulations of Beykoz University Undergraduate and Associate Degree Programs are mentioned below.

Assessment, evaluation and final grade Exams ARTICLE 31 -

  • Exams consist of short and midterm exams and final exams, single course exams, make-up exams, exemption exams and additional exams which are held in the semester.

Final Grade ARTICLE 38 – 

  • The final grade of students in a formal program related to a course is calculated through; 50% of the weighted average of the grades they receive from the midterm assessment and evaluation activities and 50% of the grades they receive from the final exam.  
  • Evaluating a course depends on: Students whose grade of success and / or final grade are under 35 are considered to be unsuccessful for that course. 
  • There is no midterm and final examination for professional practice (internship) at work. The evaluation related to this learning activity is carried out through following the instructions of Beykoz University Professional Practice (Internship) Directive. The final grade of the related activity is evaluated by the grade of Successful (BI) and Unsuccessful (BZ); these grades are not included in the grade point average. 
  • The final grades of the courses that do not require midterm and/or final exams can be evaluated as Successful (BI) / Unsuccessful (BZ) with an absolute grade according to the quality of the courses ; these grades are not included in the grade point average. 
  •  For the courses that do not require midterm and/or final exams and that have incomplete evaluation processes, Incomplete (E) grade can be given temporarily. The final grades of these courses are turned into absolute grades or Successful (BI) / Unsuccessful (BZ) when the evaluation process is complete.  

Calculating final grade and explanations   ARTICLE 41 – 

  • Final grades are calculated by considering statistical dispersion of grades and class average and converted to letter grades by “Beykoz University Relative Evaluation Directions” For the numbers of students that are not applicable to minimum relative evaluation, absolute grading system is used. The correlation between absolute grades and letter grades and their numeric grade equivalents are given in Table 1. Table 1: The correlation between absolute grades and letter grades and their numeric grade equivalents     Absolute Grade Letter Grade Numeric Grade Meaning 90 - 100 AA 4,0 Perfect 80 - 89 BA 3,5 Very Good 73 - 79 BB 3,0 Good 66 - 72 CB 2,5 Average 60 - 65 CC 2,0 Sufficient 55 - 59 DC 1,5 Pass 50-54 DD 1,0 Pass 36- 49 FD 0,5 Fail 0 - 35 FF 0,0 Fail due to absence - DZ 0,0 Fail due to absence - BI - Successful - BZ - Unsuccessful - M - Exempted  -  W  - Withdrawal  -   E  - Incomplete Grade  

a) A student who gets (AA), (BA), (BB), (CB), (CC), (DC) and (DD), (BI), (M) as a final grade for a class is considered to have passed from that class.  

b) A student who gets (FD), (FF) from a class is considered to have failed from it.  

c)  Students who do not meet the attendance requirements of a class are given DZ grade. DZ grade is counted as FF when grade point average is calculated.  

d)  (BI) is given as a grade which is not added to the grade point average and for the classes a student has passed.     

e) (BZ) is given as a grade which is not added to the grade point average and for the classes a student has not passed.  

f) (M) is given as a grade which is not added to the grade point average, and is given to the students who is counted as exempt from a class as a result of the evaluation of the exemption  in accordance with paragraph 3 in article 29 of this regulation  

g) (W) is a grade used to identify a students’ situation in the transcript in the event of a withdrawal from a class.  

h) (E) Ungraded is a temporary grade which is given to the students when the assessment process has not been completed yet. (E) grade which is not changed within the predetermined deadline will be converted to a failed grade.  

  • Conversion of university letter grades to ECTS grades and vice versa is carried out in accordance with “Beykoz University ECTS Application Guideline”.  

The Calculation of Grade Points Average ARTICLE 42 – 

  • Grade Points Average (GPA) is calculated on all the semesters by multiplying the number of credits given for a course times the value of the grade received for the course, adding the value calculated for each class and dividing by the total number of credits. 
  • Semester Grade Average is calculated within any semester by multiplying the number of credits given for a course times the value of the grade received for the course, adding the value calculated for each class and dividing by the total number of credits. 
  • Three-digit process is carried out in the calculation of the grade average and it is displayed in two-digit figure. During the rounding process, if the third digit figure after the decimal point is between 0-4, it is rounded downwards, but if it is between 5-9, it is rounded upwards.    

Quality Assurance
-

Access Requirements

Oral and Dental Health Department Student Selection and Placement Center (ÖSYM) by Higher Education Institutions Examination (YKS) according to the results are accepted as TAT score.


Conditions for Success
-

Progression Paths (Relationship Type)

Graduates of this program can work as "Oral and Dental Health Technician" in hospitals. Graduates of this department can work in dental laboratories, dental clinics, dental health departments of hospitals and companies that provide technical equipment for dental health. Graduates of this department may not work individually and may work in dental clinics, dental health departments of hospitals or public institutions


Legal Basis
-

Validity Period (If Any)
-

Url
Open Address