Raylı Sistemler Sinyalizasyon Bakım ve Onarımcısı Seviye 5 MYK Mesleki Yeterlilik Belgesi

ISCO 08: 3114

ISCO 08: 3114

This competency can be defined as a previous qualification in jobs and professions, where responsibility is taken in the fulfillment of tasks, management and supervision tasks are carried out, solutions are developed for original problems, and the performance of oneself and others is evaluated in work environments with unpredictable changes by using factual and theoretical knowledge at a comprehensive level, being aware of the boundaries of the work/professional field. presented for recognition of learning.

The learning outcomes of this qualification can be acquired in formal and non-formal learning environments, as well as independently in on-the-job and free learning environments.

The person with this qualification;

• Specifies occupational health and safety rules.
• Explains environmental protection measures and quality requirements.
• Makes pre-work preparations for signals.
• Performs periodic maintenance of signals.
• Repairs signal faults.
• Makes assembly and disassembly of signals.
• Performs the end-of-work delivery of signals.
• It performs work in accordance with occupational health and safety and environmental requirements.
• Makes pre-work preparations of train detection systems.
• Repairs the faults of train detection systems.
• Makes the assembly and disassembly of train detection systems.
• Performs the end-of-work delivery of train detection systems.
• Performs work in accordance with occupational health and safety and environmental requirements.
• Prepares ATS (Automatic Train Stop), ATP and ATC roadside equipment before work.
• Performs periodic maintenance of ATS (Automatic Train Stop), ATP and ATC roadside equipment.
• Repairs malfunctions of ATS (Automatic Train Stop), ATP and ATC en route equipment.
• It assembles and disassembles ATS (Automatic Train Stop), ATP and ATC roadside equipment.
• ATS (Automatic Train Stop), ATP and ATC performs the end-of-work delivery of roadside equipment.
• It carries out work in accordance with occupational health and safety and environmental requirements.
• Makes pre-work preparations of central and local control/monitoring systems and subsystems.
• Performs periodic maintenance of central and local control/monitoring systems and subsystems.
• Repairs the malfunctions of central and local control/monitoring systems and subsystems.
• It assembles and disassembles central and local control/monitoring systems and subsystems.
• Performs the end-of-work delivery of central and local control/monitoring systems and subsystems.
• Performs work in accordance with occupational health and safety and environmental requirements.
• Makes pre-work preparations of interlocking systems.
• Performs periodic maintenance of interlocking systems.
• Repairs the malfunctions of interlocking systems.
• Makes the assembly and disassembly of interlocking systems.
• It performs the end-of-work deliveries of interlocking systems.
• It carries out work in accordance with occupational health and safety and environmental requirements.
• Makes pre-work preparations of communication systems and subsystems.
• Performs periodic maintenance of communication systems and subsystems.
• Repairs the malfunctions of communication systems and subsystems.
• Makes the assembly and disassembly of communication systems and subsystems.
• Performs the end-of-work delivery of communication systems and subsystems.
• It carries out work in accordance with occupational health and safety and environmental requirements.
• Cable makes pre-work preparations of cable distribution boxes and active devices.
• The cable performs periodic maintenance of cable distribution boxes and active devices.
• The cable repairs the breakdowns of cable distribution boxes and active devices.
• It does the assembly and disassembly of cable, cable distribution boxes and active devices.
• Cable does the end-of-work delivery of cable distribution boxes and active devices.
• Performs work in accordance with occupational health and safety and environmental requirements.
• Makes the pre-work preparations of the scissor control systems.
• Performs periodic maintenance of scissor control systems.
• Repairs failures of scissor control systems
• Makes assembly and disassembly of scissor control systems.
• Makes the end-of-work deliveries of the scissor control systems.
• It carries out work in accordance with occupational health and safety and environmental requirements.
• Makes the pre-work preparations of the level crossing protection systems.

This qualification aims to document professional learning outcomes and does not contain key competences.

Quantification and consideration; It is carried out in accordance with the conditions and methods defined in the relevant National Competence, in line with the Vocational Qualifications Authority Examination, Measurement, Evaluation and Certification Regulation by the certification bodies authorized by MYK. In measurement and evaluation, different methods such as written and oral exams, performance exams, observation, interview, simulation, role-play, portfolio and on-the-job supervision are used.

Quality assurance processes are carried out in accordance with the VQA Quality Assurance Document and the Guidelines in its annex.

Establishment and Approval of National Qualifications:

National qualifications developed by institutions and organizations that have the power to represent the sector and profession, and VQA working groups; It is submitted for the opinion of all relevant parties for at least 15 days, verified by VQA Sector Committees and approved by VQA Executive Board. National qualifications are reviewed every five years at the latest, depending on national occupational standards.

Assesment and evaluation:

It is carried out by certification bodies accredited by TURKAK according to ISO/EN 17024 Standard and authorized by VQA in accordance with VQA legislation and conditions and methods defined in national qualifications. Measurement and evaluation activities are carried out in accordance with the pre-determined and announced exam programs. Information on qualification forms, evaluators, measurement and evaluation criteria and methods are included in the exam programs. All measurement and evaluation processes are recorded and stored on camera. Records are kept under the conditions and periods defined in VQA legislation. Measurement and evaluation activities are subject to internal and external verification processes. Evidence of verification activities is shared with the relevant institution, file managers and audit team via VQA Web Portal.

Certification:

VQA Vocational Qualification Certificate is issued to individuals who are determined to be successful by the Authorized Certification Bodies. The activities for the design and printing of VQA Vocational Qualification Certificate are carried out by VQA. Security measures such as data matrix and hologram are applied for VQA Vocational Qualification Certificate, and the accuracy of the documents can be checked on VQA Web Portal. Self-Assessment: Authorized Certification Bodies carry out self-assessment activities every year in accordance with VQA legislation and TS EN ISO / IEC 17024 Accreditation Standard. All corrective and preventive action records and supporting documents are kept and submitted to VQA with a self-assessment report.

External Evaluation:

External evaluation of Authorized Certification Bodies is carried out by TÜRKAK (TS EN) in accordance with ISO/IEC 17024 Standard, and by VQA through programmed and unscheduled audits in accordance with VQA legislation. External evaluation reports are submitted to Authorized Certification Bodies and VQA Board of Directors.

Regular Review:

The external evaluation activities and results of VQA Audit Department are regularly reviewed by VQA Executive Board. In addition, TÜRKAK's external evaluation activities and results are subject to regular review by the European Accreditation Union. Information Management Systems: Authorization, measurement-evaluation, certification, self-assessment and external evaluation processes are carried out through VQA Portal. Feedback Mechanisms: In all processes related to qualification, stakeholder participation is ensured at the highest level and opinions, suggestions, objections and complaints are evaluated in accordance with the legislation.

Entry condition is not required.

The candidates who meet the requirements and succeed at the theoretical and performance exams can be granted vocational qualification certificate for Rail Systems Signalization Maintenance and Repair (Level 5).

Vocational Qualifications Authority Law

Regulation on Preparation of National Occupational Standards and National Qualifications

Vocational Qualifications Authority Examination, Measurement, Evaluation and Certification Regulation

Audit Procedures and Principles for Vocational Qualifications Authority Certification Bodies

Qualification certificate is valid for 5 years from the date of issue.